OEM/ODM

FAQ

FAQ

Can cement be used when installing products such as ceramics or bathtubs?

Do not use cement or materials with excessive expansion coefficient. Because the expansion coefficient of cement is not consistent, thermal expansion and cold contraction will lead to ceramic cracking. Silica gel should be used. The joint between the bathtub and the wall or the ground cannot be caulked with cement or materials with excessive expansion coefficient, otherwise it may cause cracking. Silica gel should be used.

washbasin faucet mounting hole there are several kinds?

There are 3 kinds of faucet mounting holes on the washbasin, single-hole faucet, 4-inch faucet and 8-inch faucet.

What are the installation requirements for intelligent automatic toilet?

The customer's home pit distance must be consistent with the product. Some intelligent full-automatic toilets are products designed without water tanks. The inlet water pressure of such products is different from that of ordinary toilets. The inlet water pressure is 0.07MPa (when 20L/Min flows) to 0.75MPa (hydrostatic pressure).

classification of toilet?

According to the style classification split toilet: water tank and toilet body is divided into two parts of the toilet, the middle with bolts and sealing ring fixed. conjoined toilet: a toilet in which the water tank and the toilet are connected together. Wall-mounted toilet: it does not have a water tank and needs to be equipped with a concealed water tank or flush valve before it can be used. Squatting toilet: generally used in public places. Features: The production process of the conjoined toilet requires higher, and the volume is generally smaller than the body toilet, so the price is slightly higher than the same type of split toilet. Wall-mounted toilet is relatively small but the installation and construction is more complicated. According to the drainage way classification after the drainage toilet: the drain outlet in the back of the toilet. Lower drain toilet: The drain outlet is below the toilet. According to the length of the classification of lengthened toilet: the size of the toilet cover mounting hole to the front end of the toilet is generally 470mm, which is more comfortable when seated. Ordinary toilet: the size of the toilet cover mounting hole to the front end of the toilet is generally 440mm.

washbasin classification there are several kinds?

According to the style: table washbasin, under-counter washbasin, column washbasin, semi-column washbasin, table washbasin, semi-embedded washbasin, wall-mounted washbasin, semi-embedded table washbasin according to material: ceramic washbasin, cast iron washbasin, jingya washbasin, resin washbasin (light and shadow series)

Does the toilet splash when in use?

Generally not. The dirt produced when the body is abnormal will occasionally splash water at a certain speed of a certain drop. If the water seal is too small, it will affect the flushing effect of the siphon toilet.
< 12 >